Home » Dell Manuals » Laser Printers » Dell 5110cn » Manual Viewer

Dell 5110cn User Guide - Page 93

may be damaged., stops. If you go to the next step without inserting the card correctly

UPC - 054343272297

Add to My Manuals
Save this manual to your list of manuals

Page 93 highlights

5. Place the controller card on a table so that it is horizontal and extends its edge hangs over the edge of the table. Hold the memory card so its notch is aligned with the connector rib in the slot on the controller card, and insert the memory card at an angle of 30 degrees until it stops. NOTE: Ensure that the notch of the memory card is aligned with the connector rib in the slot. If you insert the memory card in the other way around, you cannot insert it correctly because the notch on the memory card is not aligned with the connector rib. Be sure to insert the memory card until it stops. If you go to the next step without inserting the card correctly, the memory card or connector may be damaged. 6. Snap the memory card notch into place by pushing down on the memory card until it is lying flat and parallel to the controller card. If you cannot easily snap the memory card into place, push down on the memory card with your thumbs as shown.

Section	Page
Dell Color Laser Printer 5110cn User's Guide	1
Finding Information	5
Dell Printer Configuration Web Tool	7
About Your Printer	56
Installing the Toner Cartridges and Imaging Drum	58
Connecting Your Printer	63
Enterprise Console Management Modules	70
Installing the Optional Tray Module and Cards	71
Print Media Guidelines	110
Loading Print Media	120
Operator Panel	130
Printer Settings	132
Understanding Printer Menus	136
Understanding Your Printer Software	177
Printing	180
Setting Up Shared Printing	187
Understanding Fonts	191
Understanding Printer Messages	201
Clearing Jams	206
Troubleshooting	224
Printing With Web Services for Devices (WSD)	294
Maintaining Your Printer	295
Removing Options	323
Printer Specifications	340
Printing With UX Filter (UNIX/Linux)	344
Printing With CUPS (Linux)	440

Match case Limit results 1 per page

Place the controller card on a table so that it is horizontal and extends its edge hangs over the edge of

the table. Hold the memory card so its notch is aligned with the connector rib in the slot on the

controller card, and insert the memory card at an angle of 30 degrees until it stops.

NOTE:

Ensure that the notch of the memory card is aligned with the connector rib in the slot. If you

insert the memory card in the other way around, you cannot insert it correctly because the notch on

the memory card is not aligned with the connector rib. Be sure to insert the memory card until it

stops. If you go to the next step without inserting the card correctly, the memory card or connector

may be damaged.

Snap the memory card notch into place by pushing down on the memory card until it is lying flat and

parallel to the controller card. If you cannot easily snap the memory card into place, push down on the

memory card with your thumbs as shown.