Dell Optiplex-620 User Guide - Page 165
Back to Contents I/O Panel, Remove the system board
View all Dell Optiplex-620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Back to Contents Page Dell™ OptiPlex™ GX620 User's Guide I/O Panel I/O Panel Removing the I/O Panel CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover. 1. Follow the procedures in "Before You Begin." 2. Remove the system board. 3. Disconnect all cables that are connected to the I/O panel. Note the routing of the control panel cables as you remove them from the computer so that you can replace them correctly. 4. From inside the computer cover, remove the mounting screws that secure the I/O panel to the computer. 5. Remove the I/O panel from the computer. Replacing the I/O Panel 1. To replace the I/O panel, follow the removal procedures in the reverse order. NOTE: Use the guides on the I/O panel bracket to help position the I/O panel in place and use the notch on the I/O panel bracket to help seat the card. Back to Contents Page