Dell Optiplex-620 User Guide - Page 83
Removing the I/O Panel, Replacing the I/O Panel
View all Dell Optiplex-620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Back to Contents Page Dell™ OptiPlex™ GX620 User's Guide I/O Panel I/O Panel Removing the I/O Panel CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover. NOTE: Note the routing of all cables as you remove them so that you can re-route them correctly when installing the new I/O panel. 1. Follow the procedures in "Before You Begin." NOTICE: When sliding the I/O panel out of the computer, be extremely careful. Carelessness my result in damage to the cable connectors and the cable routing clips. 2. Remove the screw that secures the I/O panel. Press on the release button and pull on the loop to slide the card away from the computer. 3. Disconnect all of the cables from the I/O panel, and remove the panel from the computer. 1 I/O panel release button 2 securing screw 3 I/O panel 4 I/O cable connector 5 I/O cable connector pull- loop Replacing the I/O Panel 1. To replace the I/O panel, follow the removal procedure in the reverse order. NOTE: Use the guides on the I/O panel bracket to help position the I/O panel in place, and use the notch on the I/O panel bracket to help seat the panel.