Dell PowerEdge C6105 Hardware Owner's Manual - Page 103
Fan Controller Board, Removing the Fan Controller Board
View all Dell PowerEdge C6105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
NOTE: To install the second power distribution board that is below the first power distribution board, angle the board during installation. 2 Replace the screws securing the second power distribution board to the system. See Figure 3-22. 3 Replace the power distribution board-connector. See Figure 3-22. 4 Connect all the cables to the second power distribution board. See Figure 5-12. You must route these cables properly through the tabs on the chassis to prevent them from being pinched or crimped. 5 Replace the screws securing the first power distribution board to the system. See Figure 3-22. 6 Connect all the cables to the first power distribution board. See Figure 5-12. You must route these cables properly through the tabs on the chassis to prevent them from being pinched or crimped. 7 Replace the power supply. See "Installing a Power Supply" on page 67. 8 Close the system. See "Closing the System" on page 98. 9 Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals. Fan Controller Board Removing the Fan Controller Board CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. Installing System Components | 103