Dell PowerEdge C6105 Hardware Owner's Manual - Page 92
Installing the RAID Battery, Removing and Installing the RAID Battery
View all Dell PowerEdge C6105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
5 Slide and lift the RAID battery away from the RAID battery carrier. See Figure 3-17. Figure 3-17. Removing and Installing the RAID Battery 1 RAID battery latch 3 RAID battery carrier 2 RAID battery 4 system-board assembly Installing the RAID Battery 1 Insert the RAID battery into the battery carrier until the RAID battery latch locks into place. See Figure 3-17. 2 Connect the RAID battery cable to the connector on the PERC card. 3 Replace the system-board assembly. See "Installing a System-Board Assembly" on page 69. 4 Reconnect the system to the electrical outlet and turn the system on, including any attached peripherals. 92 | Installing System Components
92
|
Installing System Components
5
Slide and lift the RAID battery away from the RAID battery carrier. See
Figure 3-17.
Figure 3-17.
Removing and Installing the RAID Battery
1
RAID battery latch
2
RAID battery
3
RAID battery carrier
4
system-board assembly
Installing the RAID Battery
1
Insert the RAID battery into the battery carrier until the RAID battery
latch locks into place. See Figure 3-17.
2
Connect the RAID battery cable to the connector on the PERC card.
3
Replace the system-board assembly. See “Installing a System-Board
Assembly” on page 69.
4
Reconnect the system to the electrical outlet and turn the system on,
including any attached peripherals.