Dell PowerEdge C6105 Hardware Owner's Manual - Page 144
Troubleshooting Expansion Cards
View all Dell PowerEdge C6105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
6 Ensure that the controller card is firmly seated into the system board connector. See "Installing the Expansion Card" on page 77. 7 If you have a battery-cached SAS RAID controller, ensure that the RAID battery is properly connected and, if applicable, the memory module on the RAID card is properly seated. 8 Ensure that the cables are firmly connected to the storage controller and the SAS backplane board. 9 Install the system-board assembly. See "Installing a System-Board Assembly" on page 69. 10 Reconnect the system to its electrical outlet, and turn on the system and attached peripherals. If the problem persists, see "Getting Help" on page 162. Troubleshooting Expansion Cards NOTE: When troubleshooting an expansion card, see the documentation for your operating system and the expansion card. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet. 2 Remove the system-board assembly. See "Removing a System-Board Assembly" on page 68. 3 Ensure that each expansion card is firmly seated in its connector. See "Installing the Expansion Card" on page 77. 4 Install the system-board assembly. See "Installing a System-Board Assembly" on page 69. 144 | Troubleshooting Your System