Dell PowerEdge C6105 Hardware Owner's Manual - Page 118
Removing and Installing the Hard-Drive Cage, See
View all Dell PowerEdge C6105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
7 Disconnect all the cables from the expander card. See Figure 5-7. Note the routing of the cable underneath the tabs on the chassis as you remove them from the system. You must route these cables properly when you replace them to prevent the cables from being pinched or crimped. 8 Disconnect front panel cables from the fan controller board. See Figure 5-11. Note the routing of the cable underneath the tabs on the chassis as you remove them from the system. You must route these cables properly when you replace them to prevent the cables from being pinched or crimped. 9 Remove the hard-drive cage from the chassis. See Figure 3-33. Figure 3-33. Removing and Installing the Hard-Drive Cage 1 hard-drive cage 2 front-panel assembly (2) 10 Remove the screws that secure the backplane to the hard-drive cage. See Figure 3-34. 118 | Installing System Components