Dell PowerEdge C6105 Hardware Owner's Manual - Page 87
Interposer Extenders, Removing the Interposer Extender
View all Dell PowerEdge C6105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
10 Start up the system, press to enter the System Setup program, and check the System Memory settings on the main System Setup screen. The system should have already changed the value to reflect the newly installed memory. 11 If the value is incorrect, one or more of the memory modules may not be installed properly. Repeat step 2 through step 10 of this procedure, to ensure that the memory modules are firmly seated in their sockets. Interposer Extenders CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. Removing the Interposer Extender 1 Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet. 2 Remove the system-board assembly. See "Removing a System-Board Assembly" on page 68. 3 Remove the five screws that secure the interposer extender to the interposer-extender tray. See Figure 3-15. 4 Disconnect all the cables from the interposer extender. See Figure 5-9. 5 Lift the interposer extender out of the interposer-extender tray. See Figure 3-15. Installing System Components | 87