Dell PowerEdge C6105 Hardware Owner's Manual - Page 79
Card Connector, Removing and Installing the Expansion
View all Dell PowerEdge C6105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
1 Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet. 2 Remove the system-board assembly. See "Removing a System-Board Assembly" on page 68. 3 Remove the expansion card. See "Removing the Expansion Card" on page 75. 4 Remove the two screws securing the expansion-card connector to the expansion-card bracket. See Figure 3-11. 5 Pull the expansion-card connector away from the expansion-card racket. See Figure 3-11. Figure 3-11. Removing and Installing the Expansion-Card Connector 1 screw (2) 3 expansion-card bracket 2 expansion-card connector Installing System Components | 79
Installing System Components |
79
1
Turn off the system, including any attached peripherals, and
disconnect the system from its electrical outlet.
2
Remove the system-board assembly. See "Removing a System-Board
Assembly" on page 68.
3
Remove the expansion card. See "Removing the Expansion Card" on
page 75.
4
Remove the two screws securing the expansion-card connector to the
expansion-card bracket. See Figure 3-11.
5
Pull the expansion-card connector away from the expansion-card racket.
See Figure 3-11.
Figure 3-11
.
Removing and Installing the Expansion
-Card Connector
1
screw (2)
2
expansion-card connector
3
expansion-card bracket