Dell PowerEdge C6105 Hardware Owner's Manual - Page 126
See
View all Dell PowerEdge C6105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
4 Disconnect all the cables from the backplane. See Figure 5-3 for 3.5inch hard drives. Note the routing of the cable underneath the tabs on the chassis as you remove them from the system. You must route these cables properly when you replace them to prevent the cables from being pinched or crimped. 5 Disconnect front panel cables from the fan controller board. See Figure 5-11. Note the routing of the cable underneath the tabs on the chassis as you remove them from the system. You must route these cables properly when you replace them to prevent the cables from being pinched or crimped. 6 Remove the hard drive cage from the chassis. See Figure 3-30. 7 Disconnect the cable from the sensor board. See Figure 5-13. 8 Remove the screw that secure the sensor board to the hard drive cage. See Figure 3-38. 9 Remove the sensor board from the hard drive cage. See Figure 3-38. 126 | Installing System Components