Dell PowerEdge C6105 Hardware Owner's Manual - Page 131
Close the system. See Closing the System
View all Dell PowerEdge C6105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
5 Replace the hard drive cage into the chassis. See Figure 3-30. 6 Replace the screws that secure the hard-drive cage to the chassis. See Figure 3-29. 7 Connect all the cables to the backplane. See Figure 5-6 for 2.5-inch hard drives. You must route these cables properly through the tabs on the chassis to prevent them from being pinched or crimped. 8 Connect front panel cables to the fan controller board. See Figure 5-11. You must route these cables properly through the tabs on the chassis to prevent them from being pinched or crimped. 9 Close the system. See "Closing the System" on page 98. 10 Replace the hard drives. See "Installing a Hard Drive into a Hard-Drive Carrier" on page 64. 11 Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals. Installing System Components | 131