Dell PowerEdge R540 EMC Installation and Service Manual - Page 100

Optimizer Mode, Table 45. Memory operating modes continued, Table 46. Memory population rules

Page 100 highlights

Table 45. Memory operating modes (continued) Memory Operating Mode Dell Fault Resilient Mode Description area to prevent errors from causing an uncorrectable failure. Requires three or more ranks to be populated in each channel. With single rank memory sparing enabled, the system memory available to the operating system is reduced by one rank per channel. For example, in a dual-processor configuration with sixteen 16 GB dual-rank memory modules, the available system memory: 16 GB x 16(memory modules) - 8GB(1 rank sparing/channel) x 12(channel) = 256 GB - 96 GB = 160 GB For multi rank sparing, in a dual-processor configuration with sixteen 64 GB quad-rank memory modules, the available system memory: 64 GB x 16(memory modules) - 32 GB(2 rank sparing/ channel) x 12 (channel) = 1024 GB - 384 GB = 640 GB NOTE: To use memory sparing, this feature must be enabled in the BIOS menu of System Setup. NOTE: Memory sparing does not offer protection against a multi-bit uncorrectable error. The Dell Fault Resilient Mode if enabled, the BIOS creates an area of memory that is fault resilient. This mode can be used by an OS that supports the feature to load critical applications or enables the OS kernel to maximize system availability. NOTE: This feature is only supported in Gold and Platinum Intel processors. NOTE: Memory configuration has to be of same size DIMM, speed, and rank. Optimizer Mode This mode supports Single Device Data Correction (SDDC) only for memory modules that use x4 device width. It does not impose any specific slot population requirements. • Dual processor: Populate the slots in round robin sequence starting with processor 1. NOTE: Processor 1 and processor 2 population should match. Table 46. Memory population rules Processor Configuration Single processor Optimizer (Independent channel) population order Memory population 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 Memory population information • Populate in this order, odd amount allowed. • Odd number of DIMM population is allowed. NOTE: Odd number of DIMMs will result in unbalanced memory configurations, which in turn will result in performance loss. It is recommended to populate all memory channels identically with identical DIMMs for best performance. 100 Installing and removing system components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175

Table 45. Memory operating modes (continued)
Memory Operating Mode
Description
area to prevent errors from causing an uncorrectable failure.
Requires three or more ranks to be populated in each channel.
With single rank memory sparing enabled, the system memory
available to the operating system is reduced by one rank per
channel.
For example, in a dual-processor configuration with sixteen 16 GB
dual-rank memory modules, the available system memory: 16 GB x
16(memory modules) - 8GB(1 rank sparing/channel) x 12(channel)
= 256 GB - 96 GB = 160 GB
For multi rank sparing, in a dual-processor configuration with
sixteen 64 GB quad-rank memory modules, the available system
memory: 64 GB x 16(memory modules) - 32 GB(2 rank sparing/
channel) x 12 (channel) = 1024 GB - 384 GB = 640 GB
NOTE:
To use memory sparing, this feature must be
enabled in the BIOS menu of System Setup.
NOTE:
Memory sparing does not offer protection
against a multi-bit uncorrectable error.
Dell Fault Resilient Mode
The
Dell Fault Resilient Mode
if enabled, the BIOS creates an
area of memory that is fault resilient. This mode can be used by an
OS that supports the feature to load critical applications or enables
the OS kernel to maximize system availability.
NOTE:
This feature is only supported in Gold and
Platinum Intel processors.
NOTE:
Memory configuration has to be of same size
DIMM, speed, and rank.
Optimizer Mode
This mode supports Single Device Data Correction (SDDC) only for memory modules that use x4 device width. It does not impose any
specific slot population requirements.
Dual processor: Populate the slots in round robin sequence starting with processor 1.
NOTE:
Processor 1 and processor 2 population should match.
Table 46. Memory population rules
Processor
Configuration
Memory population
Memory population information
Single processor
Optimizer (Independent channel)
population order
1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Populate in this order, odd
amount allowed.
Odd number of DIMM population
is allowed.
NOTE:
Odd number of
DIMMs will result in
unbalanced memory
configurations, which in
turn will result in
performance loss. It is
recommended to populate
all memory channels
identically with identical
DIMMs for best
performance.
100
Installing and removing system components