Dell PowerEdge R640 EMC PowerEdge R640 Installation and Service Manual - Page 117
Removing expansion card from the expansion card riser
![]() |
View all Dell PowerEdge R640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Figure 57. Installing the expansion riser 2A Figure 58. Installing the expansion riser 2B Next steps 1. Follow the procedure listed in After working inside your system on page 72. 2. Install any device drivers required for the card as described in the documentation for the card. Removing expansion card from the expansion card riser Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 71. 2. Follow the procedure listed in Before working inside your system on page 72. 3. If applicable, remove the air shroud. 4. If applicable, disconnect the cables from the expansion card. 5. When removing a card from riser 2 or 3, ensure that the PCIe card holder latch is closed. Installing and removing system components 117
![](/manual_guide/products/dell-poweredge-r640-emc-poweredge-r640-installation-service-manual-aa74b7c/117.png)
Figure 57. Installing the expansion riser 2A
Figure 58. Installing the expansion riser 2B
Next steps
1.
Follow the procedure listed in
After working inside your system
on page 72.
2.
Install any device drivers required for the card as described in the documentation for the card.
Removing expansion card from the expansion card riser
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
on page 71.
2.
Follow the procedure listed in
Before working inside your system
on page 72.
3.
If applicable,
remove the air shroud
.
4.
If applicable, disconnect the cables from the expansion card.
5.
When removing a card from riser 2 or 3, ensure that the PCIe card holder latch is closed.
Installing and removing system components
117