Dell PowerEdge R640 EMC PowerEdge R640 Installation and Service Manual - Page 86
Air shroud, Removing the air shroud
View all Dell PowerEdge R640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Air shroud Removing the air shroud Prerequisites CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in shutdown of the system and loss of data. 1. Follow the safety guidelines listed in Safety instructions on page 71. 2. Follow the procedure listed in Before working inside your system on page 72. Steps Hold the air shroud at both ends and lift it away from the system. Figure 35. Removing the air shroud Next steps 1. If applicable, install the air shroud. 2. Follow the procedure listed in After working inside your system on page 72. Installing the air shroud Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 71. 2. Follow the procedure listed in Before working inside your system on page 72. 3. If applicable, route the cables inside the system along the system wall and secure the cables by using the cable latch. Steps 1. Align the tabs on the air shroud with the slots on the system. 86 Installing and removing system components