Dell PowerEdge R640 EMC PowerEdge R640 Installation and Service Manual - Page 123

Removing the M.2 SSD module

Get Dell PowerEdge R640 PDF manuals and user guides View all Dell PowerEdge R640 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 123 highlights

2. Follow the procedure listed in Before working inside your system on page 72. 3. Remove the air shroud. 4. Remove the BOSS card. NOTE: Removing the BOSS card is similar to the procedure for removing an expansion card riser. Steps 1. Loosen the screws and lift the retention straps that secure the M.2 SSD module on the BOSS card. 2. Pull the M.2 SSD module away from the BOSS card. Figure 68. Removing the M.2 SSD module a. module connector (2) b. screws (2) c. module (2) Next steps Install the M.2 SSD module. Installing the M.2 SSD module Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 71. Steps 1. Align the M.2 SSD module connectors with the connectors on the BOSS card. 2. Push the M.2 SSD module until the module is seated firmly on the BOSS card. 3. Secure the M.2 SSD module on the BOSS card with the retention straps and screws. Installing and removing system components 123

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
2.
Follow the procedure listed in
Before working inside your system
on page 72.
3.
Remove the air shroud
.
4.
Remove the BOSS card.
NOTE:
Removing the BOSS card is similar to the procedure for removing an expansion card riser.
Steps
1.
Loosen the screws and lift the retention straps that secure the M.2 SSD module on the BOSS card.
2.
Pull the M.2 SSD module away from the BOSS card.
Figure 68. Removing the M.2 SSD module
a.
module connector (2)
b.
screws (2)
c.
module (2)
Next steps
Install the M.2 SSD module
.
Installing the M.2 SSD module
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
on page 71.
Steps
1.
Align the M.2 SSD module connectors with the connectors on the BOSS card.
2.
Push the M.2 SSD module until the module is seated firmly on the BOSS card.
3.
Secure the M.2 SSD module on the BOSS card with the retention straps and screws.
Installing and removing system components
123