Dell PowerEdge R640 EMC PowerEdge R640 Installation and Service Manual - Page 75
Installing the system cover
![]() |
View all Dell PowerEdge R640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Figure 22. Removing the system cover Installing the system cover Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 71. 2. Ensure that all internal cables are routed correctly and connected, and no tools or extra parts are left inside the system. Steps 1. Align the tabs on the system cover with the guide slots on the system. 2. Push the system cover latch down. The system cover slides forward, the tabs on the system cover engage with the guide slots on the system and the system cover latch locks into place. 3. Using a 1/4 inch flat head or Phillips #2 screwdriver, rotate the latch release lock clockwise to the locked position. Installing and removing system components 75
![](/manual_guide/products/dell-poweredge-r640-emc-poweredge-r640-installation-service-manual-aa74b7c/75.png)
Figure 22. Removing the system cover
Installing the system cover
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
on page 71.
2.
Ensure that all internal cables are routed correctly and connected, and no tools or extra parts are left inside the system.
Steps
1.
Align the tabs on the system cover with the guide slots on the system.
2.
Push the system cover latch down.
The system cover slides forward, the tabs on the system cover engage with the guide slots on the system and the system cover latch
locks into place.
3.
Using a 1/4 inch flat head or Phillips #2 screwdriver, rotate the latch release lock clockwise to the locked position.
Installing and removing system components
75