Dell PowerEdge R640 EMC PowerEdge R640 Installation and Service Manual - Page 125
Installing optional IDSDM or vFlash card
![]() |
View all Dell PowerEdge R640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Figure 70. Removing the optional IDSDM module NOTE: There are two dip switches on the IDSDM module for write-protection. Next steps Install the optional IDSDM/vFlash card. Installing optional IDSDM or vFlash card Prerequisites Follow the safety guidelines listed in Safety instructions on page 71. Steps 1. Locate the IDSDM/vFlash connector on the system board. To locate IDSDM/vFlash connector, see the Jumpers and connectors on page 169 section. 2. Align the IDSDM/vFlash card with the connector on the system board. 3. Push the IDSDM/vFlash card until it is firmly seated on the system board. Installing and removing system components 125
![](/manual_guide/products/dell-poweredge-r640-emc-poweredge-r640-installation-service-manual-aa74b7c/125.png)
Figure 70. Removing the optional IDSDM module
NOTE:
There are two dip switches on the IDSDM module for write-protection.
Next steps
Install the optional IDSDM/vFlash card.
Installing optional IDSDM or vFlash card
Prerequisites
Follow the safety guidelines listed in
Safety instructions
on page 71.
Steps
1.
Locate the IDSDM/vFlash connector on the system board.
To locate IDSDM/vFlash connector, see the
Jumpers and connectors
on page 169 section.
2.
Align the IDSDM/vFlash card with the connector on the system board.
3.
Push the IDSDM/vFlash card until it is firmly seated on the system board.
Installing and removing system components
125