Dell PowerEdge R640 EMC PowerEdge R640 Installation and Service Manual - Page 57
Integrated Devices, Viewing Integrated Devices
View all Dell PowerEdge R640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Option Description Table 42. UEFI iSCSI Settings screen details Option Description iSCSI Initiator Name Specifies the name of the iSCSI initiator in IQN format. iSCSI Device1 Enables or disables the iSCSI device. When disabled, a UEFI boot option is created for the iSCSI device automatically. This is set to by default. iSCSI Device1 Settings Enables you to control the configuration of the iSCSI device. UEFI iSCSI Settings Enables you to control the configuration of the iSCSI device. Table 43. UEFI iSCSI Settings screen details Option Description Connection 1 Specifies the name of the iSCSI initiator in IQN format. Connection 2 Enables or disables the iSCSI device. When disabled, a UEFI boot option is created for the iSCSI device automatically. This is set to Disabled by default. Connection 1 Settings Enables you to control the configuration of the iSCSI device. Connection 2 Settings Enables you to control the configuration of the iSCSI device. Connection order TLS Authentication Configuration View and/or modify this device's boot TLS authentication mode. None means the HTTP server and the client will not authenticate each other for this boot. One way means the HTTP server will be authenticated by the client, while the client will not be authenticated by the server. This option is set to None by default. Integrated Devices You can use the Integrated Devices screen to view and configure the settings of all integrated devices including the video controller, integrated RAID controller, and the USB ports. Viewing Integrated Devices To view the Integrated Devices screen, perform the following steps: Steps 1. Power on, or restart your system. 2. Press F2 immediately after you see the following message: F2 = System Setup NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart your system and try again. 3. On the System Setup Main Menu screen, click System BIOS. 4. On the System BIOS screen, click Integrated Devices. Pre-operating system management applications 57