Dell PowerEdge R640 EMC PowerEdge R640 Installation and Service Manual - Page 144

Rear drive cage, Removing the rear drive cage

Get Dell PowerEdge R640 PDF manuals and user guides View all Dell PowerEdge R640 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 144 highlights

Figure 95. Installing the SAS expander card Next steps 1. Connect the SAS cables to the SAS expander card. 2. Install the backplane cover. 3. Install the cooling fan assembly. 4. Install the cooling shroud. 5. Follow the procedure listed in After working inside your system on page 72. Rear drive cage Removing the rear drive cage Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 71. 2. Follow the procedure listed in Before working inside your system on page 72. 3. Remove all the drives. 4. Disconnect all the cables from the rear drive backplane. Steps 1. Using Phillips #2 screwdriver, loosen the screws that secure the drive cage to the system. 2. Pull and hold the screws to lift the drive cage away from the system. 144 Installing and removing system components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
Figure 95. Installing the SAS expander card
Next steps
1.
Connect the SAS cables to the SAS expander card.
2.
Install the backplane cover
.
3.
Install the cooling fan assembly.
4.
Install the cooling shroud
.
5.
Follow the procedure listed in
After working inside your system
on page 72.
Rear drive cage
Removing the rear drive cage
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
on page 71.
2.
Follow the procedure listed in
Before working inside your system
on page 72.
3.
Remove all the drives.
4.
Disconnect all the cables from the rear drive backplane.
Steps
1.
Using Phillips #2 screwdriver, loosen the screws that secure the drive cage to the system.
2.
Pull and hold the screws to lift the drive cage away from the system.
144
Installing and removing system components