Dell PowerEdge R640 EMC PowerEdge R640 Installation and Service Manual - Page 162
Initializing TPM for BitLocker users, Initializing the TPM 1.2 for TXT users, Initializing the TPM 2
View all Dell PowerEdge R640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Figure 112. Installing the TPM Next steps 1. Install the system board. 2. Follow the procedure listed in After working inside your system on page 72. Initializing TPM for BitLocker users Steps Initialize the TPM. For more information, see http://technet.microsoft.com/en-us/library/cc753140.aspx The TPM Status changes to Enabled, Activated. Initializing the TPM 1.2 for TXT users Steps 1. While booting your system, press F2 to enter System Setup. 2. On the System Setup Main Menu screen, click System BIOS > System Security Settings. 3. From the TPM Security option, select On with Pre-boot Measurements. 4. From the TPM Command option, select Activate. 5. Save the settings. 6. Restart your system. 7. Enter System Setup again. 8. On the System Setup Main Menu screen, click System BIOS > System Security Settings. 9. From the Intel TXT option, select On. Initializing the TPM 2.0 for TXT users Steps 1. While booting your system, press F2 to enter System Setup. 2. On the System Setup Main Menu screen, click System BIOS > System Security Settings. 3. From the TPM Security option, select On. 4. Save the settings. 5. Restart your system. 6. Enter System Setup again. 7. On the System Setup Main Menu screen, click System BIOS > System Security Settings. 162 Installing and removing system components