Dell PowerEdge R640 EMC PowerEdge R640 Installation and Service Manual - Page 77
Installing a drive blank, Removing a drive carrier
![]() |
View all Dell PowerEdge R640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Figure 24. Removing a drive blank Next steps 1. Install a drive or a drive blank. Installing a drive blank Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 71. 2. If installed, remove the front bezel. CAUTION: Mixing drive blanks from previous generations of PowerEdge servers is not supported. Steps Insert the drive blank into the drive slot, and push the blank until the release button clicks into place. Figure 25. Installing a drive blank Next steps If removed, install the front bezel. Removing a drive carrier Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 71. 2. If applicable, remove the front bezel. 3. Using the management software, prepare the drive for removal. Installing and removing system components 77
![](/manual_guide/products/dell-poweredge-r640-emc-poweredge-r640-installation-service-manual-aa74b7c/77.png)