Dell PowerEdge T110 Hardware Owner's Manual - Page 102
Installing the System Board, Grasp the system board by the edges of the system board and lift
View all Dell PowerEdge T110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
CAUTION: The processor and heat sink can become extremely hot. Allow sufficient time for the processor and heat sink to cool before handling. 9 Remove the processor heat sink. See "Removing the Processor" on page 85. 10 Using a #2 Phillips screwdriver, remove the ten screws securing the system board to the chassis and then slide the system board toward the front end of the chassis. CAUTION: Do not lift the system board by grasping a memory module, processor, or other components. 11 Grasp the system board by the edges of the system board and lift the system board out of the chassis. See Figure 3-24. Figure 3-24. Removing and Installing the System Board 1 2 1 screws (10) 2 system board Installing the System Board 1 Unpack the new system board. 2 Remove the labels from the processor shield and affix them to the system identification panel on the front of the system. See Figure 3-24. 102 Installing System Components