Dell PowerEdge T110 Hardware Owner's Manual - Page 97
Installing the Chassis Intrusion Switch, board. See
View all Dell PowerEdge T110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
5 Remove the switch and its attached cable from the system. Figure 3-21. Removing and Installing the Chassis Intrusion Switch 1 2 3 1 chassis intrusion switch 3 INTRUSION connector 2 securing bracket notch Installing the Chassis Intrusion Switch 1 Align the chassis intrusion switch with the securing bracket notch. See Figure 3-21. 2 Slide the switch into the securing bracket notch. 3 Connect the switch cable to the INTRUSION connector on the system board. See Figure 6-1. 4 Close the system. See "Closing the System" on page 58. Installing System Components 97
Installing System Components
97
5
Remove the switch and its attached cable from the system.
Figure 3-21.
Removing and Installing the Chassis Intrusion Switch
Installing the Chassis Intrusion Switch
1
Align the chassis intrusion switch with the securing bracket notch. See
Figure 3-21.
2
Slide the switch into the securing bracket notch.
3
Connect the switch cable to the INTRUSION connector on the system
board. See Figure 6-1.
4
Close the system. See "Closing the System" on page 58.
1
chassis intrusion switch
2
securing bracket notch
3
INTRUSION connector
1
2
3