Dell PowerEdge T110 Hardware Owner's Manual - Page 99
Disconnect the control panel cable from the control panel assembly
View all Dell PowerEdge T110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Figure 3-22. Removing the Link Bracket Lock 1 1 link bracket lock 6 Remove the mounting screw holding the control panel assembly to the front chassis. See Figure 3-23. 7 Lift the control panel assembly out of the system. 8 Disconnect the control panel cable from the control panel assembly: CAUTION: Do not pull on the cable to unseat the connector. Doing so can damage the cable. a Press the metal tabs on the ends of the cable connector. b Gently work the connector out of the socket. Installing System Components 99
Installing System Components
99
Figure 3-22.
Removing the Link Bracket Lock
6
Remove the mounting screw holding the control panel assembly to the
front chassis. See Figure 3-23.
7
Lift the control panel assembly out of the system.
8
Disconnect the control panel cable from the control panel assembly:
CAUTION:
Do not pull on the cable to unseat the connector. Doing so can damage
the cable.
a
Press the metal tabs on the ends of the cable connector.
b
Gently work the connector out of the socket.
1
link bracket lock
1