Dell PowerEdge T110 Hardware Owner's Manual - Page 21
Check PSU and, BIOS Update - memory upgrade
View all Dell PowerEdge T110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Message Causes Corrective Actions Alert! Power required exceeds PSU wattage. Check PSU and system configuration. Alert! Continuing system boot accepts the risk that system may power down without warning. The system configuration If any system components of processor, memory were just upgraded, return the modules, and expansion system to the previous cards may not be supported configuration. If the system by the power supply. boots without this warning, then the replaced component(s) are not supported with this power supply. See "Power Supply" on page 93. Alert! System fatal error during previous boot. An error caused the system Check other system messages to reboot. for additional information for possible causes. BIOS MANUFACTURING MODE detected. MANUFACTURING MODE will be cleared before the next boot. System reboot required for normal operation. System is in manufacturing Reboot to take the system out mode. of manufacturing mode. BIOS Update Remote BIOS update Attempt Failed! attempt failed. Retry the BIOS update. If problem persists, see "Getting Help" on page 129. About Your System 21