Dell PowerEdge T110 Hardware Owner's Manual - Page 60
Installing the Front Bezel, Removing Front Bezel Insert, See
View all Dell PowerEdge T110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Figure 3-3. Removing and Installing the Front Bezel 1 2 1 drive release latch 2 front bezel Installing the Front Bezel 1 Align the tabs on the front bezel with the slots on the chassis. See Figure 3-3. 2 Snap the bezel into place. Removing Front Bezel Insert NOTE: Before installing a drive in one or more of the front drive bays, remove the corresponding insert(s) on the front bezel. 1 From the back of the bezel, push the tab on the end of the insert outward. 2 Pull the insert away from the bezel. See Figure 3-4. 60 Installing System Components
60
Installing System Components
Figure 3-3.
Removing and Installing the Front Bezel
Installing the Front Bezel
1
Align the tabs on the front bezel with the slots on the chassis.
See Figure 3-3.
2
Snap the bezel into place.
Removing Front Bezel
Insert
NOTE:
Before installing a drive in one or more of the front drive bays, remove the
corresponding insert(s) on the front bezel.
1
From the back of the bezel, push the tab on the end of the insert outward.
2
Pull the insert away from the bezel. See Figure 3-4.
1
drive release latch
2
front bezel
1
2