Dell PowerEdge T110 Hardware Owner's Manual - Page 69
Replace the system cover. See Closing the System
View all Dell PowerEdge T110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Figure 3-9. Removing or Installing a Hard Drive 2 3 1 4 1 hard drive 3 tabs (2) 2 power/data cable 4 hard drive bracket NOTE: If you are not replacing the hard drive, remove the drive from the drive bracket (see Figure 3-11) and insert the empty bracket back into the drive bay. 5 Detach the hard-drive bracket from the hard drive by pushing out at the edges of the bracket and removing the hard drive. See Figure 3-11. 6 Replace the system cover. See "Closing the System" on page 58. 7 Place the system upright on a flat, stable surface. 8 Reattach any peripherals and connect the system to an electrical outlet. 9 Turn on the system and attached peripherals. Installing System Components 69
Installing System Components
69
Figure 3-9.
Removing or Installing a Hard Drive
NOTE:
If you are not replacing the hard drive, remove the drive from the drive
bracket (see Figure 3-11) and insert the empty bracket back into the drive bay.
5
Detach the hard-drive bracket from the hard drive by pushing out at the
edges of the bracket and removing the hard drive. See
Figure 3-11
.
6
Replace the system cover. See "Closing the System" on page 58.
7
Place the system upright on a flat, stable surface.
8
Reattach any peripherals and connect the system to an electrical outlet.
9
Turn on the system and attached peripherals.
1
hard drive
2
power/data cable
3
tabs (2)
4
hard drive bracket
2
4
3
1