Dell PowerEdge T110 Hardware Owner's Manual - Page 40
SATA Settings Screen, Enables or disables Execute Disable Memory Protection - raid
View all Dell PowerEdge T110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Option Description Logical Processor (Enabled default) On processors that support Simultaneous MultiThreading (SMT) technology, each processor core supports up to two logical processors. If this field is set to Enabled, the BIOS reports both logical processors. If set to Disabled, only one logical processor is monitored by the BIOS. Virtualization Technology (Disabled default) Enabled permits virtualization software to use the virtualization technology incorporated in the processor. NOTE: Disable this feature if your system will not be running virtualization software. Execute Disable (Enabled default) Enables or disables Execute Disable Memory Protection Technology. Number of Cores per Processor (All default) If set to All, the maximum number of cores in each processor is enabled. C States (Enabled default) When set to Enabled, the processor can operate in all available power states. Turbo Mode (Enabled default) If Turbo Boost Technology is supported by the processor, enables or disables Turbo Mode. Processor 1 Family Model-Stepping Displays the family, model, level 2 cache size, level 3, cache size, and number of cores of the processor. Level 2 Cache Displays the amount of cache memory for the processor. This option does not have user-selectable settings. Number of Cores Displays the number of cores in the processor. This option does not have user-selectable settings. SATA Settings Screen Option SATA Controller (AHCI default) Description Allows the embedded SATA to be set to Off, ATA, AHCI, or RAID modes. NOTE: The UEFI support is disabled if SATA is set to the RAID mode. 40 Using the System Setup Program and UEFI Boot Manager