Dell PowerEdge T110 Hardware Owner's Manual - Page 72
Expansion Card Stabilizer, Removing the Expansion Card Stabilizer
View all Dell PowerEdge T110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Figure 3-11. Removing or Installing a Hard Drive From a Hard Drive Bracket 1 2 1 hard drive 3 blue tabs (2) 3 2 hard drive bracket Expansion Card Stabilizer Removing the Expansion Card Stabilizer 1 Turn off the system and attached peripherals. Disconnect the system from the electrical outlet and peripherals. 2 Open the system. See "Opening the System" on page 57. 3 Press the release tab and lift the expansion card stabilizer out of slots in the chassis. See Figure 3-12. Installing the Expansion Card Stabilizer 1 Slide the edge of the expansion card stabilizer into the slots in the cooling shroud and chassis until the release tab locks into place. See Figure 3-12. 72 Installing System Components
72
Installing System Components
Figure 3-11.
Removing or Installing a Hard Drive From a Hard Drive Bracket
Expansion Card Stabilizer
Removing the Expansion Card Stabilizer
1
Turn off the system and attached peripherals. Disconnect the system from
the electrical outlet and peripherals.
2
Open the system. See "Opening the System" on page 57.
3
Press the release tab and lift the expansion card stabilizer out of slots in the
chassis. See Figure 3-12.
Installing the Expansion Card Stabilizer
1
Slide the edge of the expansion card stabilizer into the slots in the cooling
shroud and chassis until the release tab locks into place. See Figure 3-12.
1
hard drive
2
hard drive bracket
3
blue tabs (2)
3
1
2