Dell PowerEdge T110 Hardware Owner's Manual - Page 42
Integrated Devices Screen, Hard disk, Floppy, Disabled, All Ports On, Only Back Ports On, Ports Off - user manual
View all Dell PowerEdge T110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Option USB Flash Drive Emulation Type (Auto default) Boot Sequence Retry (Disabled default) Description Determines the emulation type for a USB flash drive. Hard disk allows the USB flash drive to act as a hard drive. Floppy allows the USB flash drive to act as a removable diskette drive. Auto automatically chooses the appropriate emulation type for the device. If you install a device in this slot that is configured as a removable diskette drive, you must manually set the emulation type to Floppy. If this field is enabled and the system has failed to boot, the system will reattempt to boot after 30 seconds. Integrated Devices Screen Option User Accessible USB Ports (All Ports On default) Internal USB Port (On default) Embedded Gb NIC1 (NIC1 default: Enabled with PXE; Other NICs: Enabled) MAC Address OS Watchdog Timer (Disabled default) Description Enables or disables the user accessible USB ports. Options are All Ports On, Only Back Ports On, and All Ports Off. Enables or disables the internal USB port. Enables or disables the integrated NIC. Options are Enabled, Enabled with PXE, Enabled with iSCSI Boot, and Disabled. PXE support allows the system to boot from the network. Displays the MAC address for the integrated NIC. Sets a timer to monitor the operating system for activity, and aids in recovery if the system stops responding. When Enabled, the operating system is allowed to initialize the timer. When Disabled, the timer is not initialized. NOTE: This feature is usable only with operating systems that support WDAT implementations of the Advanced Configuration and Power Interface (ACPI) 3.0b specification. 42 Using the System Setup Program and UEFI Boot Manager