Dell PowerEdge T110 Hardware Owner's Manual - Page 23

Gate A20 failure., the System Setup Program - review

Page 23 highlights

Message Causes Corrective Actions Error 8602 Auxiliary Device Failure. Verify that mouse and keyboard are securely attached to correct connectors. Mouse or keyboard cable is Reseat the mouse or keyboard loose or improperly cable. connected. Defective mouse or keyboard. Ensure that the mouse or keyboard is operational. See "Troubleshooting a USB Device" on page 106. Gate A20 failure. Faulty keyboard controller; See "Getting Help" on faulty system board. page 129. General failure. The operating system is unable to carry out the command. This message is usually followed by specific information. Note the information, and take the appropriate action to resolve the problem. Invalid configuration information please run SETUP program. An invalid system configuration caused a system to halt. Run the System Setup program and review the current settings. See "Using the System Setup Program and UEFI Boot Manager" on page 35. Keyboard controller failure. Faulty keyboard controller; See "Getting Help" on faulty system board. page 129. Keyboard data line failure. Keyboard stuck key failure. Keyboard cable connector is improperly connected or the keyboard is defective. Reseat the keyboard cable. If the problem persists, see "Troubleshooting a USB Device" on page 106. Keyboard fuse has Overcurrent detected at failed. the keyboard connector. See "Getting Help" on page 129. About Your System 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144

About Your System
23
Error 8602 -
Auxiliary Device
Failure. Verify
that mouse and
keyboard are
securely
attached to
correct
connectors.
Mouse or keyboard cable is
loose or improperly
connected.
Reseat the mouse or keyboard
cable.
Defective mouse or
keyboard.
Ensure that the mouse or
keyboard is operational. See
"Troubleshooting a USB
Device" on page 106.
Gate A20 failure.
Faulty keyboard controller;
faulty system board.
See "Getting Help" on
page 129.
General failure.
The operating system is
unable to carry out the
command.
This message is usually
followed by specific
information. Note the
information, and take the
appropriate action to resolve
the problem.
Invalid
configuration
information -
please run SETUP
program.
An invalid system
configuration caused a
system to halt.
Run the System Setup
program and review the
current settings. See "Using
the System Setup Program and
UEFI Boot Manager" on
page 35.
Keyboard
controller
failure.
Faulty keyboard controller;
faulty system board.
See "Getting Help" on
page 129.
Keyboard data
line failure.
Keyboard stuck
key failure.
Keyboard cable connector
is improperly connected or
the keyboard is defective.
Reseat the keyboard cable. If
the problem persists, see
"Troubleshooting a USB
Device" on page 106.
Keyboard fuse has
failed.
Overcurrent detected at
the keyboard connector.
See "Getting Help" on
page 129.
Message
Causes
Corrective Actions