Dell PowerEdge T110 Hardware Owner's Manual - Page 25

MEMTEST lane, failure, detected on, address, value - support

Get Dell PowerEdge T110 PDF manuals and user guides View all Dell PowerEdge T110 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Message Causes Corrective Actions Memory odd/even logic failure at address, read value expecting value. Faulty or improperly See "Troubleshooting System installed memory modules. Memory" on page 113. Memory write/read failure at address, read value expecting value. Faulty or improperly See "Troubleshooting System installed memory modules. Memory" on page 113. Memory set to minimum frequency. The memory frequency may be intentionally set lower for power conservation. If not an intentional setting, check any other system messages for possible causes. The current memory configuration may support only the minimum frequency. Ensure that your memory configuration supports the higher frequency. See "General Memory Module Installation Guidelines" on page 80. Memory tests terminated by keystroke. POST memory test was Information only. terminated by pressing the spacebar. MEMTEST lane failure detected on x. Invalid memory configuration. A mismatched memory module is installed. Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" on page 80. About Your System 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
About Your System
25
Memory odd/even
logic failure at
address,
read
value
expecting
value.
Faulty or improperly
installed memory modules.
See "Troubleshooting System
Memory" on page 113.
Memory
write/read
failure at
address
, read
value
expecting
value.
Faulty or improperly
installed memory modules.
See "Troubleshooting System
Memory" on page 113.
Memory set to
minimum
frequency.
The memory frequency
may be intentionally set
lower for power
conservation.
If not an intentional setting,
check any other system
messages for possible causes.
The current memory
configuration may support
only the minimum
frequency.
Ensure that your memory
configuration supports the
higher frequency. See "General
Memory Module Installation
Guidelines" on page 80.
Memory tests
terminated by
keystroke.
POST memory test was
terminated by pressing the
spacebar.
Information only.
MEMTEST lane
failure
detected on
x.
Invalid memory
configuration. A
mismatched memory
module is installed.
Ensure that the memory
modules are installed in a valid
configuration. See "General
Memory Module Installation
Guidelines" on page 80.
Message
Causes
Corrective Actions