Dell PowerEdge T110 Hardware Owner's Manual - Page 74
Installing the Cooling Shroud, of the cooling shroud.
View all Dell PowerEdge T110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Figure 3-12. Removing and Installing the Cooling Shroud 1 2 3 4 1 cooling shroud 3 release tab 2 expansion card stabilizer 4 cooling shroud touch points (2) Installing the Cooling Shroud 1 Align the holes on the cooling shroud with the alignment guides on the system fan. 2 Hold the touch points on the cooling shroud and carefully lower the cooling shroud into the system. Ensure that no cables are under the edges of the cooling shroud. 3 Replace the expansion card stabilizer. See "Installing the Expansion Card Stabilizer" on page 72. 4 Close the system. See "Closing the System" on page 58. 74 Installing System Components
74
Installing System Components
Figure 3-12.
Removing and Installing the Cooling Shroud
Installing the Cooling Shroud
1
Align the holes on the cooling shroud with the alignment guides on the
system fan.
2
Hold the touch points on the cooling shroud and carefully lower the
cooling shroud into the system. Ensure that no cables are under the edges
of the cooling shroud.
3
Replace the expansion card stabilizer. See "Installing the Expansion Card
Stabilizer" on page 72.
4
Close the system. See "Closing the System" on page 58.
1
cooling shroud
2
expansion card stabilizer
3
release tab
4
cooling shroud touch points (2)
1
4
3
2