Dell PowerEdge T110 Hardware Owner's Manual - Page 62
Installing an EMI Filler Panel, Replace the front bezel. See Installing the Front Bezel
View all Dell PowerEdge T110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
3 Remove the front bezel. See "Removing the Front Bezel" on page 59. 4 Slide the drive release latch in the direction of the arrow to release the shoulder screw. See Figure 3-5. 5 Pull the tab to remove the EMI filler panel. Figure 3-5. Removing and Installing the EMI Filler Panel 1 2 3 4 1 drive release latch 3 EMI filler panel 2 shoulder screws (2) 4 tab Installing an EMI Filler Panel 1 Gently slide the EMI filler panel into the bay until it clicks into place. See Figure 3-5. 2 Replace the front bezel. See "Installing the Front Bezel" on page 60. 3 Close the system. See "Closing the System" on page 58. 62 Installing System Components
62
Installing System Components
3
Remove the front bezel. See "Removing the Front Bezel" on page 59.
4
Slide the drive release latch in the direction of the arrow to release the
shoulder screw. See Figure 3-5.
5
Pull the tab to remove the EMI filler panel.
Figure 3-5.
Removing and Installing the EMI Filler Panel
Installing an EMI Filler Panel
1
Gently slide the EMI filler panel into the bay until it clicks into place. See
Figure 3-5.
2
Replace the front bezel. See "Installing the Front Bezel" on page 60.
3
Close the system. See "Closing the System" on page 58.
1
drive release latch
2
shoulder screws (2)
3
EMI filler panel
4
tab
3
2
4
1