GE 60-806-95R-16Z Installation Instructions - Page 25

Using Shortcut Numbers To go directly to a setting in tier 2, you can enter the shortcut number for that setting. Shortcut numbers in this manual appear in parenthesis ( ), next to the setting name. For example this heading shows the Downloader Code shortcut to be 0000. Downloader Code (0000) System Programming Shortcut numbers can be used from any setting location within tier 2. ¾ To advance to tier 2 program menus: Š With the system in program mode and the display showing SYSTEM PROGRAMMING, press ƒ once. The display should show SECURITY. Security Menu The SECURITY menu lets you choose whether security settings affect the whole system (global) or a specific partition. Important ! Each security access code (Installer, Dealer, System Master, or User) must be unique. Do not use the same combination of numbers for any two codes. ¾ To access global or partition security menu items: 1. With the display showing SECURITY, press ƒ. The display should show GLOBAL. 2. Press ƒ again to advance to global settings OR Press A or B to display PARTITION 1, then press ƒ to advance to partition 1 settings. The following describes how to program the security settings that appear under GLOBAL. Downloader Code (0000) Security-Global (Default = 12345) The 5-digit downloader code is used in conjunction with downloader pro- ¾ To program a Downloader Code: gramming. The down-loader operator must have the panel account number 1. With the display showing DOWNLOADER and downloader code in order to perform any programming. CODE nnnnn (current code), enter the desired Note 5-digit code, + ƒ. The display flashes the The Downloader Code cannot be deleted from panel memory. To change the entered code. Downloader Code to its default setting, enter 12345 in the procedure to the right. The Downloader Code will be reset to defaults during a Memory Clear only if the 2. Press ƒ and the display shows DOWN- Dealer Code is not set OR if the Dealer Code is used to initiate the Memory Clear. LOADER CODE nnnnn (new code). Installer Code (0001) Security-Global (Default = 4321) The 4-digit installer code is used for entering program mode and changing ¾ To program an Installer Code: system settings. If a dealer code is programmed, only those settings not asso- 1. With the display showing INSTALLER CODE ciated with phone numbers can be changed. nnnn (current code), enter the desired 4-digit Note code + ƒ. The display flashes the entered The Installer Code cannot be deleted or cleared from panel memory. To change code. the Installer Code to its default setting, enter 4321 in the procedure above. 2. Press ƒ and display shows INSTALLER CODE nnnn (new code). Programming the Panel 20