GE 60-806-95R-16Z Installation Instructions - Page 39
Buffer Full Rpt 05006, Zone Restorals 05007, Two Trip Error 05008, TP Panic RPT FMT 05009, AC
UPC - 046188090938
View all GE 60-806-95R-16Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Buffer Full Rpt (05006) Reporting-Global (Default=off) When this setting is turned on, the panel sends an "event buffer full" report to the central monitoring station when the panel event buffer (memory) is nearly full. ¾ To turn Buffer Full Report off or on: 1. With the display showing BUFFER FULL RPT OFF/ON (current setting), press 1 (off) or 2 (on). The display flashes the entered setting. 2. Press ƒ and the display shows the new setting. Zone Restorals (05007) Reporting-Global (Default=off) When this setting is on, the panel reports a restoral to the central monitoring station (or pager) when wireless or hardwire zones in alarm are reset or "restored" before the alarm is canceled. Note As with all GE Security panels, hardwire smoke detectors connected to Concord or SnapCard hardwire zones do not send restorals. ¾ To turn Zone Restoral reporting off or on: 1. With the display showing ZONE RESTORALS OFF/ON (current setting), press 1 (off) or 2 (on). The display flashes the entered setting. 2. Press ƒ and the display shows the new setting. Two Trip Error (05008) Reporting-Global (Default=off) This setting works with the "Alarm Verify" feature. If Alarm Verify is turned ¾ To turn Two Trip Error off or on: on, then the panel waits for a second sensor trip before sending an alarm (see 1. With the display showing TWO TRIP ERROR "Appendix A: Table A3. Sensor Group Characteristics"). OFF/ON (current setting), press 1 (off) or 2 If Two Trip Error is also on and a second sensor trip does not occur within a 4- (on). The display flashes the entered setting. minute time period, then the panel sends an error report to the central monitor- 2. Press ƒ and the display shows the new set- ing station. ting. When this feature is turned off, the panel does not send "Two Trip Error" reports. Note For UL Listed systems, Two Trip Error must be turned off. TP Panic RPT FMT (05009) This setting determines how the panel formats touchpad panic alarms reports to the central station. When this feature is on, touchpad panic alarms report using the following 3digit codes: Auxiliary-597, Police-598, Fire-599 When turned off, touchpad panic alarms report using a 3-digit code from 500 to 503 with the last digit identifying the touchpad device number. Reporting-Global (Default=off) ¾ To turn TP Panic RPT FMT off or on: 1. With the display showing TP PANIC RPT FMT OFF/ON (current setting), press 1 (off) or 2 (on). The display flashes the entered setting. 2. Press ƒ and the display shows the new setting. AC Failure (05010) Reporting-Global (Default=off) When this setting is on, the panel reports to the central station if AC power to the panel is out for 15 continuous minutes. Note For UL Listed systems, AC Failure must be turned on. ¾ To turn AC Failure reports off or on: 1. With the display showing AC FAILURE OFF/ ON (current setting), press 1 (off) or 2 (on). The display flashes the entered setting. 2. Press ƒ and the display shows the new setting. Programming the Panel 34