HP 1300 Service Manual - Page 127
Bottom assemblies, ECU, Removing the ECU 1 of 5
UPC - 808736419819
View all HP 1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Bottom assemblies ECU 1 Remove the left side cover (see "Left side cover" on page 81). 2 Remove the back cover (see "Back cover" on page 82). 3 Remove the right side cover (see "Right side cover" on page 84). 4 Remove the formatter. [See "Formatter (hp LaserJet 1300 series)" on page 97, or see "Formatter (hp LaserJet 1150 printer)" on page 99.] 5 Unplug the three spade connectors (callout 1). 6 Disconnect the motor cable connector (callout 2) on the side of the motor. 7 Unplug the fuser cable connector (callout 3) by pressing and releasing the tab on the back of the connector. 8 Unplug all other cable connectors (callout 4) from the ECU. 1 2 4 3 Figure 68. Removing the ECU (1 of 5) ENWW Bottom assemblies 127
ENWW
Bottom assemblies
127
Bottom assemblies
ECU
1
Remove the left side cover (see “Left side cover” on page 81).
2
Remove the back cover (see “Back cover” on page 82).
3
Remove the right side cover (see “Right side cover” on page 84).
4
Remove the formatter. [See “Formatter (hp LaserJet 1300
series)” on page 97, or see “Formatter (hp LaserJet 1150 printer)”
on page 99.]
5
Unplug the three spade connectors (callout 1).
6
Disconnect the motor cable connector (callout 2) on the side of
the motor.
7
Unplug the fuser cable connector (callout 3) by pressing and
releasing the tab on the back of the connector.
8
Unplug all other cable connectors (callout 4) from the ECU.
Figure 68.
Removing the ECU (1 of 5)
1
2
3
4