HP 1300 Service Manual - Page 44
the separation pad, and snap both sides into place., Reinstall the input trays
UPC - 808736419819
View all HP 1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
7 Snap both sides of the separation pad firmly into place. CAUTION Make sure that the separation pad is straight and that there is no space between the separation pad and the spring-loaded base. If the separation pad is not straight or you see space on one side, remove the separation pad, make sure that the larger tab is on the right, reinsert the separation pad, and snap both sides into place. 8 Reinstall the input trays, and then plug the printer in and turn it back on. 44 Chapter 3 - Maintenance ENWW
44
Chapter 3 - Maintenance
ENWW
7
Snap both sides of the separation pad firmly into place.
CAUTION
Make sure that the separation pad is straight and that there is no space
between the separation pad and the spring-loaded base. If the
separation pad is not straight or you see space on one side, remove
the separation pad, make sure that the larger tab is on the right, reinsert
the separation pad, and snap both sides into place.
8
Reinstall the input trays, and then plug the printer in and turn it
back on.