HP 5100tn Printer Job Language - Technical Reference Manual - Page 252

HP LaserJet 5Si/ 5SiMx/5Si Mopier Comments HP LaserJet 5Si, 5SiMx, and 5Si Mopier printers have several features that differentiate them from most of the other LaserJet printers. The following features should be kept in mind when writing PJL code for these printers. Three standard paper input sources are provided (two 500-sheet paper cassettes and a 100-sheet multi-purpose tray). Input selection can be controlled by selecting a media type rather than a particular input tray-this feature is controlled using PCL, instead of PJL, but it may affect the manner in which PJL code is written (see the PCL 5 Comparison Guide for more information concerning this feature). Jobs may be canceled using the printer control panel. If unsolicited status is enabled when jobs are canceled, the printer responds with a status message (see the "Job Cancellation" section in Chapter 5 for more information). A PCL and PostScript-supported disk accessory is available for storing information such as fonts and macros. Chapter 9 describes the PJL file system that manages the files on the printer disk. The default symbol set is PC-8 instead of Roman-8. The LaserJet 5Si and 5Si Mx printers have a top (correct-order) output tray, holding 500 pages, and a side (100-sheet face-up) output tray. The LaserJet 5Si Mopier printer has a top (correct-order) output tray, holding 500 pages, a side (100-sheet face-up) output tray, a multi-bin mailbox (5 bins) and a stapler bin. (See the following page for instructions on stapling or collating documents.) A-40 Feature Support