HP 5100tn Printer Job Language - Technical Reference Manual - Page 54

EOJ Command The EOJ command informs the printer that the job has completed. Use this command whenever you use the JOB command. Note The JOB and EOJ commands are always used in pairs. Do not use one without the other. Syntax: @PJL EOJ [NAME = "job name"] [] Parameters: Parameter NAME = "job name" Functional Range Roman-8 characters 33 thru 255, , Default N/A NAME = "job name" - Using the EOJ command, you can name your print job. The job name variable is a string and must be enclosed in double quotes as shown in the command syntax. The job name string need not be the same name used in the JOB command. If the NAME option is included, the unsolicited end-of-job status includes the job name (if unsolicited job status is enabled). Comments: The EOJ command marks the end of the job started with the previous JOB command. The EOJ command: Resets the PJL Current Environment variables to their default (NVRAM) values, as if the printer powered down and then powered up again. Resets the page number associated with unsolicited page status. 5-8 Job Separation Commands