HP 5100tn Printer Job Language - Technical Reference Manual - Page 82

Variable PRINTAREA PRINTQUALITY QTY RENDERMODE REPRINT RESOLUTION RESOURCESAVE RESOURCESAVESIZE General PJL Environment Variables Description Sample Value Range INKEDAREA sets the DesignJet to shift the FULLSIZE, plot to the top/left and advance the page cut in INKEDAREA order to save media. Sets the default print quality for the current PJL job. DRAFT, NORMAL, HIGH Sets the number of collated copies of a job. 1 to 999 Sets the render mode for the personality. COLOR, GRAYSCALE Determines whether pages are reprinted after a paper jam. When AUTO is selected and the amount of RAM installed is below a printerspecific threshold, pages are not reprinted after a jam. If the amount of RAM installed is more than this threshold, the pages are reprinted. The ON setting causes the printer to reprint the job after a paper jam. The OFF setting disables reprinting. AUTO, OFF, ON Print resolution in dots per inch. When a job is sent, if there is not enough memory to run with the current resolution and page protection configuration, the system temporarily overrides the resolution and/or page-protect values to run the job. When the resolution is changed, memory is reconfigured and all downloaded fonts, PCL macros, and PostScript dictionaries are lost (however, no I/O data is lost). Refer to "Commands that Affect Printer Memory" in Appendix A. 300, 600 Sets the value of the resource-saving variable. ON, OFF, AUTO (This variable is set as a personality-specific variable using LPARM : personality.) Sets the size of the resource saving area for the specified personality if RESOURCESAVE=ON. 0 to maximum available memory (in 100 Kbyte increments) 6-20 Environment Commands