HP 5100tn Printer Job Language - Technical Reference Manual - Page 28
Pjl Job Start = 1 <lf>, Pjl Job Start = 1 Finish = Home <lf>
View all HP 5100tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
For example, in the following two sample PJL commands, START is a valid option for the JOB command, but FINISH is not a valid option (the END option should be used). The START option is executed, but the FINISH option is ignored. Valid command: @PJL JOB START = 1 Invalid command: @PJL JOB START = 1 FINISH = HOME Note Any errors that occur during PJL parsing can be received by enabling device status as described in Chapter 7 (send the @PJL USTATUS DEVICE = VERBOSE command). Appendix D lists the status codes that are received by the host when an invalid command is received and unsolicited verbose device status is enabled. 2-10 PJL Command Syntax and Format
For example, in the following two sample PJL commands,
START is a valid option for the JOB command, but FINISH
is not a valid option (the END option should be used). The
START option is executed, but the FINISH option is
ignored.
Valid command:
@PJL JOB START = 1 <LF>
Invalid command:
@PJL JOB START = 1 FINISH = HOME <LF>
Note
Any errors that occur during PJL parsing can be received
by enabling device status as described in Chapter 7 (send
the @PJL USTATUS
DEVICE = VERBOSE command).
Appendix D lists the status codes that are received by the
host when an invalid command is received and unsolicited
verbose device status is enabled.
2-10
PJL Command Syntax and Format