HP 5500n HP Color LaserJet 5500 series printers - Software Technical Reference - Page 84
Head - Output Bin Options, 3Head - Options, 3Head - Printer image, MENUS, RETRIEVE JOB, USER NAME - 5500 driver
View all HP 5500n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Note Step 1 Press the select button (the one with the check mark) to enter MENUS. Step 2 RETRIEVE JOB is highlighted. Step 3 Press the select button to select RETRIEVE JOB. Step 4 Press the down arrow to highlight your USER NAME. Step 5 Press the select button to select your USER NAME. Step 6 Press the down arrow to highlight a JOB NAME. Step 7 Press the select button to select the JOB NAME. Step 8 Press the down arrow to highlight DELETE. Step 9 Press the select button to select DELETE. Step 10 If you assigned a PIN number to the job, press the up or down arrow to select the first digit of the PIN. Step 11 Press the select button to select the digit. The number changes to an asterisk. Step 12 Repeat the last two steps for each of the remaining three digits of the PIN. Step 13 Press the select button when finished entering PIN. Step 14 Press the select button to delete the job. Output Bin Options The HP Color LaserJet 5500 product has one output bin that can be selected in the driver, so one item appears in the Bin list: Top Bin (Face-Down). Top Bin (Face-Down) refers to the main output bin at the top of the printer and is the only setting for the HP Color LaserJet 4600 printer driver. Jobs sent to this bin are delivered face-down. This option is always available and has no paper size or type constraints beyond those determined by the printer hardware. Options The Options drop-down menu is inactive. This setting can be used to enable non-HP paper-handling devices. Printer image The bitmap image in the lower-right portion of the Destination tab screen represents the current physical configuration of the printer according to the driver configuration data (obtained automatically through bidirectional communication, or configured manually through the driver). It should have the same appearance as the image in the same location on the Paper tab and the Configure tab. On the Destination tab, the printer image contains hot spots for selecting an output bin. When the pointer moves over a hot spot, the arrow reverts to the gloved hand used in the Bubble Help, the preview image, and other areas. The current output bin is highlighted in a bright green color on the printer bitmap. On the Destination tab, only output bins have hot spots and can be highlighted; source trays must be selected from the Paper tab. 82 3 Driver features Software Technical Reference