HP 9000 rp4410-4 Installation Guide, Sixth Edition - HP 9000 rp4410/rp4440 - Page 42
Volume Filler Installation in Slot 2, Installing Hot-Pluggable Disk Drives, Step 1.
View all HP 9000 rp4410-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Installing the System Installing Additional Components Installing Hot-Pluggable Disk Drives One additional hot-pluggable disk drive can be added to the server in slot 2. Always use low profile disk drives (1 inch height) in the server. To install a hot-pluggable disk drive, follow these steps: Step 1. Remove the volume filler from slot 2. Figure 1-20 Volume Filler Installation in Slot 2 NOTE For cooling purposes, always leave the volume filler in slot 2 if you do not use a second disk drive. Step 2. Slide the hot-pluggable disk drive into slot 2 until it is seated. 42 Chapter 1
Installing the System
Installing Additional Components
Chapter 1
42
Installing Hot-Pluggable Disk Drives
One additional hot-pluggable disk drive can be added to the server in slot 2. Always use low profile disk drives
(1 inch height) in the server.
To install a hot-pluggable disk drive, follow these steps:
Step 1.
Remove the volume filler from slot 2.
Figure 1-20 Volume Filler Installation in Slot 2
NOTE
For cooling purposes, always leave the volume filler in slot 2 if you do not use a
second disk drive.
Step 2.
Slide the hot-pluggable disk drive into slot 2 until it is seated.