HP 9000 rp4410-4 Installation Guide, Sixth Edition - HP 9000 rp4410/rp4440 - Page 75
Console Setup, Setting Up the Console
View all HP 9000 rp4410-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Installing the System Console Setup To enable general network connectivity for the server, follow these steps: Step 1. Obtain a valid IP address for each LAN port you plan to activate. Step 2. Connect the LAN cable from an available LAN port into a live connection on the network. Console Setup This section describes how to set up and start a console session on the server. Setting Up the Console Setting up the console includes the following steps: • Determine the physical access method to connect cables. There are two physical connections to the Integrity iLO MP: - LAN - Local RS-232 serial port • Configure the Integrity iLO MP and assign an IP address if necessary. Though there are several methods to configuring the LAN; DHCP with DNS is the preferred method. DHCP with DNS comes preconfigured with default factory settings, including a default user account and password. Other options include: - ARP Ping - Local RS-232 serial port - Remote/modem port Chapter 1 75