HP 9000 rp4410-4 Installation Guide, Sixth Edition - HP 9000 rp4410/rp4440 - Page 56
Inserting DIMM Into the Extender Board Connector, Installing DIMMs, Step 1.
View all HP 9000 rp4410-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Installing the System Installing Additional Components Installing DIMMs To install DIMMs, follow these steps: Step 1. Align the DIMM with the socket located on the memory extender board. (Align the notch in the DIMM with the tab in the connector.) Step 2. Firmly and evenly push on each end of the DIMM until it seats in the socket. Ensure that the extraction levers are in the closed position. Figure 1-31 Inserting DIMM Into the Extender Board Connector Replacing the Memory Extender Board To replace the memory extender board, follow these steps: Step 1. Ensure that the extraction levers are in the outward, unlocked position. Step 2. Align the memory extender board with the left and right chassis guide slots. Step 3. Slide the memory extender board in until it begins to seat in the socket located on the midplane riser board. Step 4. Push the extraction levers inward to the locked position to fully plug the memory extender board into the midplane riser board. Step 5. Replace the front cover onto the chassis. (See "Replacing the Front Cover" on page 30.) 56 Chapter 1