HP 9000 rp4410-4 Installation Guide, Sixth Edition - HP 9000 rp4410/rp4440 - Page 50
Installing the Processor on the Extender Board, DO NOT OVERTIGHTEN See Step 7
View all HP 9000 rp4410-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Installing the System Installing Additional Components Figure 1-27 Installing the Processor on the Extender Board Tightening Sequence for 4-Shoulder Screws is 1, 2, 3, 4 DO NOT OVERTIGHTEN (See Step 7) 3 2 Knurled 1 Thumb- 2 Screws 4 Torx-T15 Use Torx T15 Driver to Tighten Shoulder Screws and Thumbscrews 2.5 MM Allen Key Align Pins on Heatsink with Slots in Frame Slots* Slots* Power Cable Protected by Plastic Sleeve *Slots shown are at CPU1 socket. Processor shown is being mounted on socket CPU0 per load order. 50 Chapter 1
Installing the System
Installing Additional Components
Chapter 1
50
Figure 1-27
Installing the Processor on the Extender Board
4
2
3
1
Tightening Sequence for 4-Shoulder
Screws is 1, 2, 3, 4
DO NOT OVERTIGHTEN (See Step 7)
2 Knurled
Thumb-
Screws
Align Pins on
Heatsink with
Slots in
Frame
Power Cable Protected by
Plastic Sleeve
Slots*
Slots*
*Slots shown are at
CPU1 socket.
Processor shown is
being mounted on
socket CPU0 per load
order.
Torx-T15
Use Torx T15 Driver
to Tighten Shoulder
Screws and
Thumbscrews
2.5 MM Allen Key