HP Armada 4200 Armada 4100 and 4200 Families of Personal Computers Maintenance - Page 109
Computer Feet, the foot free from the base cover.
View all HP Armada 4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
5.4.2 Computer Feet There are four locations where the two different computer feet may be applied. The locations are: one on the hard drive and three on the CPU base cover. To replace the computer feet, complete the following steps: 1. Peel the old foot from the computer. Use a razor blade if needed to lift a corner of the foot free from the base cover. 2. Clean the area where the new foot is to be applied with a clean dry cloth. 3. Install the new foot, pressing it firmly into place. Figure 5-19. Computer Feet Locations Removal and Replacement Procedures 5-21
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Removal and Replacement Procedures
5-21
5.4.2
Computer Feet
There are four locations where the two different computer feet may be applied. The
locations are: one on the hard drive and three on the CPU base cover. To replace the
computer feet, complete the following steps:
1.
Peel the old foot from the computer. Use a razor blade if needed to lift a corner of
the foot free from the base cover.
2.
Clean the area where the new foot is to be applied with a clean dry cloth.
3.
Install the new foot, pressing it firmly into place.
Figure 5-19
.
Computer Feet Locations