HP Armada 4200 Armada 4100 and 4200 Families of Personal Computers Maintenance - Page 118
Lithium Real Time Clock Battery
View all HP Armada 4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
5.5.3 Lithium Real Time Clock Battery To remove the Lithium real time clock (RTC) battery, complete the following steps: 1. Disconnect the AC power and any external devices (Section 5.3.1). 2. Undock the computer from the auxiliary base if necessary (Section 5.3.2). 3. Remove all battery packs (Section 5.3.3). 4. Remove the memory cover (Section 5.5.1). 5. Remove the Lithium RTC battery by lifting it up from the system board. 6. Disconnect the RTC battery cable from the connector. ! WARNING: There is a risk of explosion and injury if the battery is incorrectly replaced or handled improperly. Do not attempt to recharge, disassemble, immerse in water, or dispose of it in fire. Replacement should be done using the Compaq spare part for this computer. CAUTION: To prevent damaging the RTC battery cable, rock the connector from side to side to disconnect it. Figure 5-27. Removing the Lithium Real Time Clock Battery Reverse the procedure to install a replacement RTC battery. 5-30 Removal and Replacement Procedures