HP Armada 4200 Armada 4100 and 4200 Families of Personal Computers Maintenance - Page 129
ribbon display cable and the ground cable through the slot to prevent damage.
View all HP Armada 4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
7. Turn the computer top side up and open the display to a vertical position, 8. Remove the four clutch screws at the back of the display assembly. 9. Lift the display assembly from the CPU base. As you lift the display , guide the flat ribbon display cable and the ground cable through the slot to prevent damage. Figure 5-41. Removing the Screws and Lifting the Display Assembly from the Clutches CAUTION: Do not pull out the clutch cover when removing the display assembly. Doing so may damage the microphone cable harness. Removal and Replacement Procedures 5-41
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Removal and Replacement Procedures
5-41
7.
Turn the computer top side up and open the display to a vertical position,
8.
Remove the four clutch screws at the back of the display assembly.
9.
Lift the display assembly from the CPU base. As you lift the display , guide the flat
ribbon display cable and the ground cable through the slot to prevent damage.
Figure 5-41.
Removing the Screws and Lifting the Display Assembly from the Clutches
CAUTION:
Do not pull out the clutch cover when removing the display assembly. Doing
so may damage the microphone cable harness.